| 刘文松,朱恩,王健,孙磊,林叶.基于叉形编码路径的JPEG2000位平面编码器VLSI结构的设计与验证[J].高技术通讯(中文),2012,22(1):106~111 |
| 基于叉形编码路径的JPEG2000位平面编码器VLSI结构的设计与验证 |
| Design and verification of a JPEG2000 VLSI architecture of bit plane coder using 2 branch coding path |
| 修订日期：2010-09-02 |
| DOI： |
| 中文关键词: JPEG2000， 位平面编码器， 叉形编码路径， 两窗口流水线 |
| 英文关键词: JPEG2000, bit plane coder, 2 branch coding path, 2 window pipeline |
| 基金项目:863计划（2009AA11Z219）资助项目 |
| 作者 | 单位 | | 刘文松 | 东南大学射频与光电集成电路研究所 | | 朱恩 | 东南大学射频与光电集成电路研究所 | | 王健 | 中国科学院自动化研究所 | | 孙磊 | 东南大学射频与光电集成电路研究所 | | 林叶 | 东南大学射频与光电集成电路研究所 |
|
| 摘要点击次数: 2761 |
| 全文下载次数: 2224 |
| 中文摘要: |
| 研究了JPEG2000中位平面编码算法，提出了适用于显著性传播过程和清除过程的叉形编码路径，使得完成一个4×n条带编码的路径长度缩减为标准的(n+1)/（2n）。基于该编码路径，设计了两窗口流水线硬件编码结构，该结构通过两个编码窗口流水线滑动在平均每个时钟内完成16个样本点的位平面编码，关键模块采用组合电路实现，避免了时钟消耗和复杂控制，可在位平面间并行进行。给出了系统的整体VLSI架构。FPGA验证结果表明，系统时钟可综合到203.083MHz，处理512×512的灰度图像达276fps，可满足图像实时 |
| 英文摘要: |
| Based on the study of the bit plane coding in JPEG2000, the 2 branch coding path for significance propagation pass and cleanup pass was proposed with the aim of reducing the coding path length for a 4×n strip as (n+1)/(2n) of the standard one. Based on the proposed coding path, a hardware structure called 2 window pipeline capable of bit plane coding 16 bits per cycle on the average by pipeline sliding of 2 coding windows was proposed, whose key module was implemented by combination circuits, avoiding the cycle consumption and the complicated control, while allowing the parallel working between multiple bit planes. The corresponding VLSI architecture of the whole bit plane coder was constructed. The results of the experiment on FPGA shows that the system frequency can be synthesized into 203.083MHz, which can process 276 frames of 512×512 gray image per second, satisfying the requirement of realtime image processing. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
